Front Blind Installation

This guide will help you with installation of the front blinds into the cabinetry.

1: Install the outrigger side first.  Make sure you insert the fitting directly over the pins, do not try to set the panel in front of the pins then slide into position.  This would be the most common mistake made during the installation process.

2: Once the outrigger side is in place, then install the opposite side by sliding it into position.  Now tighten the Supra fittings with a simple 3/4 of a turn with a phillips screw driver.

3: Finished with the installation.  Be sure to notice the notch faces the outrigger.  The fittings are intentional in design so as to only fit one way.

Send mail to ken@cabinetworks.com with questions or comments about this web site.