Steel Rack Outriggers

Assembly instructions to mount the Steel Rack Outriggers.

1: Choose your height at which you will mount your countertop.  Typical working height at a seated position is between 28-1/2"      

    to 29", but your specific needs may be different.

2: Be sure to count out even rack spacing, since  our unit only requires 2 "even" rack spaces in height. 

3: Secure the brackets onto the rack-rail on both sides and on the rear set of rails as well.

4: Slide the Steel outrigger through the brackets, then tighten the allen-head set screws.  You will need to level the outrigger at this point, so adjustment

    from the bottom side may be needed.

5: Install the countertop onto the outriggers and secure with 2-1/2" wood screws that are provided.

Send mail to ken@cabinetworks.com with questions or comments about this web site.